Configuring Through Acemanager; Activating Using At Commands; Using Direct Commands To The Internal Hardware - Sierra Wireless AirLink MP597 Quick Start Manual

Rev 1.0 Mar.10
Figure 0-7: Confirm IP Address

Configuring through ACEmanager

AceManager is a free utility. Follow the steps below to connect to AceManager for
configuring the modem.
• Ensure MP connectivity to access AceManager.
• Go to: http://192.168.13.31:9191 (ethernet connection) the first time you
connect to AceManager.

Activating Using AT Commands

An alternate method to configure and activate your MP 597 is by using AT
commands sent directly to the modem with a terminal application. (Refer to the
troubleshooting section).
It is not possible to activate the MP 597 using either ACEmanager or ACEnet.
Caution:
Using Direct Commands to the Internal
Hardware
Use only if the ALEOS method is unsuccessful.
29