Table of Contents
Advertisement
Configuring your Raven
Tip: You can use common settings on one modem to configure those
same settings on another modem even of a different type. For
example, you can use the serial settings of a modem (such as
PinPoint X or Raven X) to configure the serial settings of a Raven.
Settings not applicable to the modem on which you are loading the
template, will be discarded.
3. Optional: Applying one template to
several modems simultaneously with
AceNet
AceNet allows you to connect to and monitor several modems
at the same time. For your convenience, you can also apply a
single template to selected modems simultaneously.
Connecting to the modems with AceNet is covered in the
AceNet User Guide.
Caution: When applying a template in AceNet, it is even more
important to make sure there are no non-general settings in the
template from the "master" modem.
Unlike AceManger, AceNet does not check the modem type
before applying the template. Settings not applicable, such as
a USB setting from a Raven XT template being applied to a
Raven X, are not read by the receiving modem. You will get a
ʺpartial successʺ status if all items in a template cannot be
applied by the receiving modem.
a.
Select modems to configure with the template.
Rev 3.0B Feb.08
40
Advertisement
Table of Contents
