Raven iDEN
122
RKEY=n
Enable/disable MDS Radio transceiver keying. Radio keying is
designed to assert CTS when a packet is received, delay the
time as specified, send the data out the serial port, wait the
same amount time, drop CTS. This way, the CTS signal can be
used to key a transmitter on and give it time to reach its power
level before data is sent to it. Delay interval is specified in S221.
•
n=0 : Off (Default).
•
n=1 : On.
Addr List
Figure 1-16: AceManager : Addr List
MLIST and MLISTX are configured by the fields available in
the Addr List group. AceManager automatically differentiates
between them to enter the correct command for the modem.
MLISTid=d.d.d.d
Enters an ID and IP address into the Modbus List. ID is a
decimal value (1 to 100).
•
id=ID
•
d.d.d.d=IP address or name
MLISTXhexid=d.d.d.d
Enters an ID and IP address into the Modbus List. ID is a
hexadecimal value (0 to 64).
•
hexid=ID
•
d.d.d.d=IP address or name
20070914