Table of Contents
Advertisement
Rev 3.0B Feb.08
Tip: If you have the speed for your modem configured as something
other than the default, use the Standard Modem that matches the
speed you configured.
h.
Select Next.
Figure 3-5: Add Hardware Wizard: Select Ports
i.
Check Selected Ports
j.
Select the COM port the modem is connected to
(commonly COM1).
k.
Select Next.
Figure 3-6: Add Hardware Wizard: Finish
l.
Once the modem driver is installed, select Finish.
Windows Dial-up Networking (DUN)
138
Advertisement
Table of Contents
