Settings/Network Settings - Grandstream Networks GVC3200 Administration Manual

Common Layout Adjusts the initial layout for video display for meetings. There are 4 available modes
Mode for users: Remote mode, Average mode and PIP mode

Settings/Network Settings

Network Settings lists Basic Settings, 802.1X, QoS, Proxy and Advanced Settings.
Parameters Descriptions
Basic Settings
Preferred Internet
Allows user to select the preferred Internet Protocol whether IPv4 or IPv6.
protocol
Allows users to configure the appropriate network settings on the device. Users could
select "DHCP", "Static IP" or "PPPoE". By default, it is set to "DHCP".
•
Address Type
•
•
DHCP Option 132 defines VLAN ID and DHCP Option 133 defines priority tag ID.
GVC320x supports DHCP VLAN override via DHCP Option 132 and DHCP Option
133, or encapsulated DHCP Option 132 and DHCP Option 133 in DHCP Option 43.
Users could select "Disable", "DHCP Option 132 and DHCP Option 133", or
"Encapsulated in DHCP Option 43". By default, it is set to "Encapsulated in DHCP
Option 43":
• When set to "DHCP Option 132 and DHCP Option 133", the GVC320x will get
DHCP VLAN
override DHCP Option 132 as VLAN ID and get DHCP Option 133 as VLAN priority, from the
DHCP server directly.
• When set to "Encapsulated in DHCP Option 43", the GVC320x will get VLAN ID
and VLAN priority value from the DHCP Option 43 which has DHCP Option 132 and
DHCP Option 133 encapsulated. In this case, please make sure the option "Allow
DHCP Option 43 and Option 66 to Override Server" is enabled under GVC320x
webUI→Maintenance→Upgrade.
Host name
It is used to configure the name of the client in the DHCP request. It is optional but
(Option 12)
may be required by some Internet Service Providers.
It is used to configure the vendor class ID header in the DHCP request. The default
Vendor Class ID
setting is "Grandstream GVC3200" for GVC3200 and "Grandstream GVC3202" for
(Option 60)
GVC3202.
DHCP: Obtain the IP address via one DHCP server in the LAN. ALL domain values
about static IP/PPPoE are unavailable (although some domain values have been
saved in the flash.)
PPPoE: Configures PPPoE account/password. Obtain the IP address from the
PPPoE server via dialing.
Static IP: Manually configures IP Address, Subnet Mask, Default Router's IP
Address, DNS Server 1 and DNS Server 2.
GVC3200/3202 Administration Guide
Version 1.0.3.64
P a g e | 54