Configuring Ipvt10; Descriptions Of Meeting Capacity - Grandstream Networks IPVT10 Administration Manual

Network Connection
3
Indicator
4 Failure Indicator
Notice
If you encounter any problem about the equipment, please contact with Grandstream support engineer.

CONFIGURING IPVT10

Descriptions of Meeting Capacity

Table 8: IPVT10 Server Meetings Performance
Current Max Max
Meeting Video Partici
Number Feeds pants
300
(Dual
NICs)
1 120
200
(Single
NIC)
2 120 200
4 120 160
6 120 140
8 120 130
When the network connection is normal: the light is flashing yellow
When the network connection is abnormal, or the network is not connected with the
equipment: the light is off
Normal condition: the light is always off
When the equipment is faulted: the light is flashing red.
Table 7: Checking the indicators after powering up IPVT10
Descriptions
If the participant only uses a
single NIC to join the conference only supports 200 participants in the conference which
is limited by the bandwidth. If the participants use dual NICs at the same time, the
participants could use different IP addresses to join
the meeting, and the participant amount is up to 300.
Supported H.264
The meeting allows users to enable all specified meeting layouts.
Supported H.264
Both 2 current meetings could enable all specified meeting layouts.
With more conferences at the same time for the server loading, the maximum
number of participants in the conference will be less.
Supported H.264
The 4 meetings could enable up to 6 specified meeting layouts.
With more conferences at the same time for the server loading, the maximum
number of participants in the conference will be less.
Supported H.264
The 6 meetings could enable up to 4 specified meeting layouts.
With more conferences at the same time for the server loading, the maximum
number of participants in the conference will be less.
Supported H.264
The 8 meetings could enable up to 2 specified meeting layouts.