Equipment Specifications; Mounting Ipvt10 Equipment To Cabinet - Grandstream Networks IPVT10 Administration Manual

USB
4 Interfaces 3 USB 2.0. Users could connect with a mouse or keyboard.
and 4
USB
5 Interfaces 5 USB 3.0. Users could connect with a mouse or keyboard.
and 6
1000M
6 Ethernet Connect to the network LAN port, connect with a PC to access the configuration page of the server
Interface 1
1000M
7 Ethernet Connect to the network LAN port
Interface 2
VGA
8 Connect to a VGA equipment
Interface

Equipment Specifications

Name
Power Supply
Applicable Cabinet
Equipment Size
USB Interfaces
LAN Interfaces
Display Interfaces
Operating Temperature

Mounting IPVT10 Equipment to Cabinet

Users can install the IPVT10 in a 19-inch cabinet that conforms to the IEC (International Electro-Technical Commission) 60297
standards.
1. The IPVT10 server is heavy and we suggest carrying it with two people at least.
2. If the cabinet has been installed, then suggest a space of at least "2U" (1U=44.45mm) to be reserved.
3. Users can select the regular rail for installation or optional installation.
Example:
Table 5: IPVT10 Back Panel Description
Description
550W. (Redundancy PSU)
2U Rackmount Design, and it supports 19" cabinets and rails.
Base Equipment Size:
Height 88mm * Width 430mm * Depth 650mm.
3x USB 3.0 (2 rear, 2 via header).
3x USB 2.0 (2 rear, 2 via header).
2x RJ45 Gigabit Ethernet LAN ports.
1x RJ45 Dedicated IPMI LAN port.
1 x VGA port.
0°C to 45°C
Table 6: IPVT10 Equipment Specifications