Assa Abloy NORTON RIXSON 5200 Series Installation Instructions Manual

5200 Series Full Feature Low Energy Operator
Model 5211 (Pull Side)
Installation Instructions
WARNING
This product can expose you to lead which is known to
the state of California to cause cancer and birth defects or
other reproductive harm. For more information go to
www.P65warnings.ca.gov.
5211 Pull Side Up to 120° opening
Backplate
(5200BP)
End Cap Kit
(5200END)
Pair
Tools Needed
#7 #16
12-24
1/4-20
#2 & #3 2.5mm Punch or Hole Saw
Copyright © 2023, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9352-0023-020 Rev 2 06/23
Power Supply
Operator Body
(5210LAP)
Standard Pull
Arm Pkg
(6210-1)
Safety Glasses
3/16" 3/32"
9/32" 3/8"
Ø7/8 Drill
Wire Stripper/ Pliers
Cutter
Pour la version francaise voir NortonRixson.com.
READ AND FOLLOW ALL INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
Optional
AC Power/
Conduit Bracket
(6300CBPC)
(6200CM)
Track
(7100-1T)
Supplied Fasteners and Tools
3x Track Option
#12-24 x 1-3/4"
Cable
Sleeve Nut
Ties
& Bolt
4x
Operator Body
1/4-20 x 3-3/4"
3/16"
5/32"
2x
12x
w/ Nylon Patch
#14 x 1-3/4"
Self-Tapping
Screw
6x
1/4-20 x 5/8"
Power Supply
Machine Screws
& End Caps
1/4-20 x 3/8"
Cover (5200COV)
2x
Optional
8-32 x 1/4"
1x
Machine
Arm
Screw
1/4-20 x 3/4"
12x
1x
Cable
Retaining Clip