Assa Abloy Norton 5700 Series Installation And Instruction Manual

ASSA ABLOY
2
6
7
8
Tools required:
• 1/8" allen wrench (included)
• Flat blade screwdriver (potentiometer & terminal size)
• Screwdriver (Phillips size 2)
• Tape ruler
Always disconnect the main power to the operator prior to

servicing or cleaning.
To reduce the risk of injury or person, use the operator only with

Pedestrian Swing doors.
This operator is for indoor use only.

Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.
Copyright © 2010, 2013 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
1
3
10
12
9
Item No. Description
1 Back plate
2 Door Closer (1601LAP or 1601BFLAP)
3 Motor Assembly (5700M)
4 Inverter (5700IN)
5 Cover (5700COV)
6 On/Off switch
7 Circuit Breaker
8 120VAC Electrical Connections
9 Activation Inputs
10 Door Open/Closed Position Magnets
11 Optional RF Receiver
12 Power Supply - 1.1A 24V
!
Installation and Instruction Manual
4
11
• Power drill and set of drill bits
• Center punch
• Wire stripper
• #7 drill 1/4-20 tap (metal frame install)
WARNINGS
120VAC power supplied to the operator must be a dedicated

circuit from the main circuit breaker panel and must NOT be
connected into any building lighting system that operates
flourescent lights.
Maximum door size: 48 in (1219mm) wide x 250 lb (113.4kg).

5700 Series
Power Operator
ASSA ABLOY
80-9357-0001-020 (09-13)
Patents 5,881,497; 7,316,096; 7,484,333
5
80-9357-0001-020 (09-13)