ASSA ABLOY
3
6
Tools required:
• Adjustable wrench
• Flat blade screwdriver (potentiometer & terminal size)
• Screwdriver (Phillips size 2)
• Tape ruler
• Torque wrench (up to 25lbf-ft)
Glazing Material: the glazing material for swinging doors shall comply with ANSI Z97.1
Use screw pack and hardware provided to mount operator.
WARNING: To reduce the risk of injury to person,
use this operator only with: Pedestrian Swing doors.
Copyright © 2010, 2014 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
Installation and Instruction Manual
10
1
2
Item No. Description
1
Back plate
2
Operator (5900MOT)
3
Main control unit (5900CM)
4
120VAC electrical power connection
5
Cover (5900COV)
6
On/Off/Hold open switch
7
Activation inputs
8
Cover cap
9
12/24VDC output for locking hardware
Door stop (5900DS)
10
Complies with the following: ANSI/BHMA A156.19, UL325,
1
9
7
4
• Power drill and set of drill bits
• Center punch
• Wire stripper
• #7 drill 1/4-20 tap (metal frame install)
UL10C, FCC, Part 15, Sub Part B, CSA C22.2 No. 247
5900 Series
Power Operator
ASSA ABLOY
8
5
80-9359-0001-020 (01-14) Rev 3