Mounting The Door Shoe - Assa Abloy 5800 ADAEZ PRO Installation And Operation Instructions Manual

®
5800 ADAEZ PRO
Installation and Operation Instructions
7
Operator And Door Arm Installation Instructions - Pull Side Applications

Mounting the Door Shoe

1. If the door frame is steel or aluminum and rivnuts
must be installed, refer to Figure 20 and
PERFORM the following:
a. Using a 25/64" drill, DRILL the door arm pivot
bracket holes.
b. Using a rivnut tool, INSTALL the ¼-20 steel
rivnuts.
c. INSTALL and TIGHTEN the two (minimum) ¾"
socket head capscrews (with black oxide
washers) securing the door arm pivot bracket to
the underside and face of the frame header.
Figure 20
2. If the door frame is wood, refer to Figure 18 and
PERFORM the following:
a. Using a 5/32" drill, DRILL the door arm pivot
bracket pilot holes.
b. INSTALL and TIGHTEN the three #14 x 1-¼"
wood screws (minimum) securing the door arm
pivot bracket to the underside and face of the
frame header.
24 of 50
700002-Rev N 09/18