Verifying The Configuration - HP 10500 Series Configuration Manual

# Enable the DHCP service.
[SwitchA] dhcp enable
# Exclude an IP address from automatic allocation.
[SwitchA] dhcp server forbidden-ip 10.1.1.2
# Configure DHCP address pool 0 and specify the subnet, lease duration, DNS server address,
and a static route to subnet 20.1.1.0/24.
[SwitchA] dhcp server ip-pool 0
[SwitchA-dhcp-pool-0] network 10.1.1.0 mask 255.255.255.0
[SwitchA-dhcp-pool-0] expired day 10
[SwitchA-dhcp-pool-0] dns-list 20.1.1.1
[SwitchA-dhcp-pool-0] option 121 hex 18 14 01 01 0A 01 01 02
Enable the DHCP client on VLAN-interface 2 on Switch B.
2.
<SwitchB> system-view
[SwitchB] interface vlan-interface 2
[SwitchB-Vlan-interface2] ip address dhcp-alloc

Verifying the configuration

# Use the display dhcp client command to view the IP address and other network parameters assigned
to Switch B.
[SwitchB-Vlan-interface2] display dhcp client verbose
Vlan-interface2 DHCP client information:
Current machine state: BOUND
Allocated IP: 10.1.1.3 255.255.255.0
Allocated lease: 864000 seconds, T1: 432000 seconds, T2: 756000 seconds
Lease from 2009.02.20 11:06:35
DHCP server: 10.1.1.1
Transaction ID: 0x410090f0
Classless static route:
Destination: 20.1.1.0, Mask: 255.255.255.0, NextHop: 10.1.1.2
DNS server: 20.1.1.1
Client ID: 3030-3066-2e65-3230-
T1 will timeout in 4 days 23 hours 59 minutes 50 seconds.
# Use the display ip routing-table command to view the route information on Switch B. A static route to
network 20.1.1.0/24 is added to the routing table.
[SwitchB-Vlan-interface2] display ip routing-table
Routing Tables: Public
Destinations : 5
Destination/Mask
10.1.1.0/24
10.1.1.3/32
20.1.1.0/24
127.0.0.0/8
302e-3030-3032-2d45-
7468-6572-6e65-7430-
2f30
Proto Pre
Direct 0
Direct 0
Static 70
Direct 0
to 2009.03.02 11:06:35
Routes : 5
Cost NextHop
0 10.1.1.3
0 127.0.0.1
0 10.1.1.2
0 127.0.0.1
70
Interface
Vlan2
InLoop0
Vlan2
InLoop0