Table of Contents
Advertisement
Installation instructions
3.3 Transport and storage
Always transport the machine in an upright position.
Take care during transport, as there is a risk of tipping. N.B.! The machine must
not be transported without a pallet or other support. Some form of support beam
must always be used along the sides of the machine during transport. Otherwise
the machine may become damaged. When transporting the machine without a
normal wooden pallet, always check that none of the components underneath the
machine can be damaged.
A = Pumps
B = Spacers
If the machine is not being installed immediately, it must be stored in a frost-free
area where the air is dry.
3.4 Unpacking
•
•
•
•
WD-18CW
Check against the delivery note that all the units have been delivered.
Remove the packaging, but leave the pallet and any transport supports in
place.
Packaging must be sent for destruction or recycling in accordance with
local regulations.
Inspect the machine for any transport damage.
10
Rev. (202211)
Advertisement
Table of Contents
