Table of Contents
Advertisement
Installation instructions
3.3 Transport and storage
3.3.1 Unpacking
Always transport the machine in an upright position.
Take care during transport, as there is a risk of tipping. N.B.! The machine must
not be transported without a pallet or other support. Some form of support beam
must always be used along the sides of the machine during transport. Otherwise
the machine may become damaged. When transporting the machine without a
normal wooden pallet, always check that none of the components underneath the
machine can be damaged.
A
A=Pumps
B=Spacers
If the machine is not being installed immediately, it must be stored in a frost-free
area where the air is dry.
Check that all parts have been delivered by comparing them with the delivery
note.
Remove the packing material. Inspect the machine for any transport damage.
Recycling
•
The machine is manufactured from stainless steel plate, among other
things, and also contains electronic components. Recycling of the appli-
ance when its economic lifetime has been reached must be carried out in
accordance with current rules and regulations.
•
Packaging must be sent for destruction or recycling in accordance with lo-
cal regulations.
WD-11
touch
B
11
Rev. 00 (202310)
A
B
Advertisement
Table of Contents
