Table of Contents
Advertisement
You may wish to explore the "Advanced Parameters" options as supported
by your Radio Link Modules, especially when administering larger networks
that encompass more than 10 RLMs.
Advanced parameter options include:
•
Advanced parameters, such as, RTS/CTS Medium Reservation, Distance
between Access Point RLMs.
•
Bridge parameters that enable you to filter specific networking protocols
and/or traffic between specific stations.
•
Access Point RLM parameters, or
•
SNMP parameters
For most networks, the default settings for the advanced parameters will
provide more than reliable network connectivity. You are advised to change
these parameters only when you are familiar to the type of parameters, for
example based upon your experience and expertise with similar parameters
in wired and/or SIMATIC NET IWL networking environments.
i
A number of the advanced parameters described below may be
marked as "common" parameters. This means that they should be
the same for all Radio Link Modules in your network (see also
Configuring Large Networks (page
To set the advanced parameters, simply follow the instructions as described
in the previous section,
connect to the Access Point RLM that you wish to configure.
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
Configuring Infrastructure Networks (page
218)).
58), to
191
Advertisement
Table of Contents
