To overcome the performance issue described on previous pages, you can
choose to design a high performance network based on the following
principles:
•
Add more Radio Link Modules to your network.
•
Configure Access Points RLMs in neighboring cells to operate at
different frequency channels with a maximum channel separation (see
Frequency Channel Management (page
•
Adjust the
balance of the number of wireless stations per Access Point RLM (see
Distance Between APs (page
!
By changing the
or
wireless radios, that will show the following behavior:
•
The stations will show a more active roaming behavior and connect to
one of the added Access Points RLMs more quickly.
148
194)).
, you can virtually reduce the receiver sensitivity of the
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
138)).
parameter to optimize the load
parameter from
C79000-G8976-C171-01
to