Table of Contents
Advertisement
You can use the RLM Manager to:
•
Display a standard set of SNMP variables to monitor general LAN traffic
performance in your network (see
•
Display remote link test measurements (see
(page
103)) between a (remote) Access Point RLM of your choice and a
wireless station connected to the selected Access Point RLM.
The RLM Manager has been designed to monitor your network from a
central location (e.g. the LAN administrator station) enabling you to monitor
wireless performance in areas that can not easily be reached. For example:
wireless networks in remote locations.
The RLM Manager program offers a variety of diagnostic options of which
the following two are the most relevant for standard users:
•
System information (see
•
Remote link test (see
•
Remote statistics (see
All other diagnostic options are standard SNMP tallies that are not described
in this manual, but documented in the on-line help system of your RLM
Manager program.
98
System Information (page
Remote Link Test Window (page
Remote Statistics Tab (page
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
Remote Statistics Tab (page
Remote Link Test Window
108)).
101))
103))
108))
C79000-G8976-C171-01
Advertisement
Table of Contents
