Table of Contents
Advertisement
To connect to the RLM proceed as follows:
1. Start the RLM Manager program.
2. Select the Radio Link Module that you wish to configure from the list or
enter the IP address in the field
RLM (see
•
A new Radio Link Module is marked with a special icon.
•
This list will display all Access Points RLMs located on the same IP
subnet as your management station (see also
Configuration (page
•
To gain access to Access Points RLMs on a different subnet or via a
dial-up connection, enter a specific IP address in the field
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
Figure 11 Main RLM Manager
226)).
window).
Access Point RLM.
Modifying the
61
Advertisement
Table of Contents
