Table of Contents
Advertisement
A read/write password will provide you with full access to display Radio Link
Module diagnostic information found under the
the configuration settings found under the
Entering an incorrect password will result in a time-out error, or "SNMP error
no such name" .
To define a read/write password:
1. Start the RLM Manager and select the target RLM from the list or enter
a specific IP address.
2. Click the
3. Select the
4. In the field
default value is "public" .
5. Click
to save the configuration to the Radio Link Module.
!
In addition to the read and read/write passwords, you can restrict access to
the Radio Link Module configuration to a limited number of authorized
stations.
178
button to connect to the Radio Link Module.
tab.
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
button.
, enter the new password. The
button, as well as
C79000-G8976-C171-01
Advertisement
Table of Contents
