1. Preparation
Identify and record all information related to each of the Radio Link
Modules to be configured.
2. Creating a template file
Identify and set the common parameters that should apply to all RLMs
within your network.
3. Configuring all Radio Link Modules
Import the template file and modify all the unique identifiers to
differentiate the Access Point RLM from the other RLMs.
!
To prepare the configuration, you need to carry out the following activities:
•
Unpack the RLM and record their serial number and MAC address on
the "Access Point Configuration Record" as printed in
Configuration (page 232)
•
Make a list of IP addresses available in your network, you will need one
IP address for each Radio Link Module.
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
of this document.
Start-up
221