Table of Contents
Advertisement
•
One of the test partners is using a wireless card that does not support
the high rates.
To investigate link quality results in more detail, you can use one of the
following buttons:
•
- to display more detailed information related to the current link
quality and troubleshooting hints to increase performance.
•
- to momentarily stop the dynamic indicators and updating of
numerical values, for example to analyze the results on your screen in
more detail.
•
- to reset all of the diagnostic counters back to zero.
You can use this option to investigate the results of an action to remedy
a cause of poor performance. For example after you switched off a
microwave oven that you suspect is causing interference. Clicking the
button will analyze the link quality again, ignoring previous results
that may have adversely influenced the statistics.
•
- to display general information about the CP 1515 Manager link
test.
To access the on-line help system you can also press the
key on your keyboard.
You can use the Test History tab to display link test results as a line-chart.
You can change the display to include the diagnostic parameters of your
choice, and a user-defined time window. You can set the time window to
display the information of the last minute, last hour or last 24 hours.
80
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
function
F1
C79000-G8976-C171-01
Advertisement
Table of Contents
