Siemens CP 1515 User Manual page 245

When in"Forced Reload Mode" the RLM will stop bridging operation. The
Access Point RLM is only capable of accepting a new software image to be
programmed into the FlashROM.
To access the Radio Link Module in forced reload mode you may need to
reconfigure your LAN administrator station.
If your RLM is equipped withCP 1515 cards, you may wish to do the forced
reload using a configuration scenario as described in Setting Up your LAN
Administrator Station (see either
Connection or
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
Figure 8 Wireless Access via an Indirect
Figure 6 Wired Access via a Network
Connection).
245