1. Remove the cover of the RLM.
2. Locate the two small holes on the long-edge side of the processor
module, marked "Reset" and "Reload" (see
3. Use a small pointed object, such as the tip of a ball-point, to press the
button.
4. Release the
The Radio Link Module will do start-up diagnostics, characterized by LED
activity, where the LEDs will change color in the range Amber, Red and
Green.
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
button and wait 5 seconds.
Figure
44).
249