Table of Contents
Advertisement
The Access Point IP tab enables you to set the common IP parameters and
to change the unique IP address of your Radio Link Modules.
To change the IP parameters proceed as follows:
1. Make sure you are connected to the right Access Point RLM in the edit
mode and select the
(see
Figure 40 Setup Radio Link Module IP
2. Verify and/or modify the parameters of your choice.
The mandatory parameters that you must specify are:
•
case of a BOOTP or DHCP server, this IP address is entered
automatically).
•
Access Point
in case of a BOOTP or DHCP server, this IP address is entered
automatically).
•
(optional)
RLMs.
•
(optional)
Access Point RLMs).
All parameters are explained in the next paragraphs.
3. When finished, proceed with configuring other parameters or click
to save the configuration and return to the main RLM Manager window.
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
address (unique for each Access Point RLM, in
(the same for all Radio Link Modules,
(usually the same for all Access Point
(Time To Live) (usually the same for all
tab to display the IP parameters
Parameters).
207
Advertisement
Table of Contents
