Siemens CP 1515 User Manual page 63

Industrial ethernet wireless lan rlm manager
Hide thumbs Also See for CP 1515:
Table of Contents

Advertisement

b.
Record the IP address on the
located in
4. Enter the Read Write password and click
"public").
If the RLM is found and if you entered the right passwords, a new
window appears with parameter tabs to change the configuration
(see
Figure 12 RLM Manager Wireless Interfaces
If the Radio Link Module is not found in the network and/or the
configuration is not read, or if the wrong password is entered, the
message "
Click
You are now ready to change the RLM configuration settings.
When installing the SIMATIC NET Industrial Wireless LAN network, you are
advised to modify the default settings of the wireless network interfaces.
Although the Radio Link Module will work fine with its factory-set values,
changing the parameters to unique values will differentiate your network
from possible neighboring networks.
1. Select the tab
Wireless Interfaces
2. Choose the slot of the RLM (
Card that you wish to configure.
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
A "Start-up
to return to the main RLM Manager window and try again.
tab).
Configuration".
(default password is
" appears.
(see
Figure 12 RLM Manager
or ) that contains the PC
tab).
63

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic net

Table of Contents