Table of Contents
Advertisement
Wired Equivalent Privacy (WEP) data encryption enables you to encrypt all
data that will be transmitted via the wireless LAN medium.
To use WEP within your network, all access points and wireless stations
must be equipped with CP 1515 cards that have been configured to use
identical encryption keys.
To enable encryption:
1. Start the RLM Manager and select the RLM.
2. Click the
3. Select the
4. Click the
(see
Figure 35 Enabling WEP
5. Select the option
•
Enter up to 4 different keys to decrypt data received via the wireless
interface
•
Select one of these keys to encrypt wireless data that is to be
transmitted via the wireless interface.
6. Click
to return to the
7.
Click
again to save the configuration to the Radio Link Module and to
return to the main RLM Manager window.
!
Optionally you can choose to configure your Access Point RLM to allow or
deny non-encrypted data.
170
button.
button to view the Wireless Security Setup window
Encryption).
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
tab.
to enable encryption, and:
tab.
C79000-G8976-C171-01
Advertisement
Table of Contents
