Table of Contents
Advertisement
The manual data logging function allows you to take a snapshot of the
measurement data at specific moment in time, e.g. when you are running
site monitor to do a site survey or when you are investigating a particular
source of interference.
When you choose the manual mode, you may also wish to enable the
information, e.g. a description of the location or event. If you enable this
option, a dialog box will appear each time you press the
The manual data logging option is typically used on CP 1515 Manager
stations roaming the network running site monitor.
The automatic data logging function allows you to log the network
performance automatically at preset intervals. This may be useful if you wish
to monitor recurring events or variation in values over a long period of time.
When you choose the automatic mode, you need to set the measurement
interval to a specific number of seconds.
Automatic data logging is typically used when the CP 1515 Manager station
is running a link test at a particular location.
1. Click the
Monitor window to display the window pictured in
Settings.
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
option to allow you to add comments to your logging
tab in the Link Test window or in the Site
button.
Figure 17 Log
93
Advertisement
Table of Contents
