Table of Contents
Advertisement
When you suspect that network protocols are adversely affecting the
performance of your network, use the following procedure to filter out
unnecessary or unwanted network protocols.
1. Investigate what type of network stations and services are located in the
environment of your network.
2. Consult the documentation that came with your network operating
system to investigate which protocols are required for network servers
and services, and for the (wireless) stations.
3. Start the RLM Manager program.
4. Select the Radio Link Module of your choice and click the
5. Select the
6. On the top-right side of the protocol filtering section, click the
button to open the Protocols to Filter window (pictured in
37 Select Ethernet Protocols to be
7.
Place a check mark for all protocols that you wish to filter.
8. (Optional) To add a non-listed protocol to the list, click the
button to enter the protocol manually.
9. When finished click
All of the protocols that you have selected, and/or all of the custom
protocols that you have added manually, will be listed in the
10. Click
again to save the changes to the Access Point RLM and to
return to the main window of the RLM Manager.
120
tab to show the protocol filtering information.
to return to the
field.
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
Filtered).
tab.
button.
Figure
C79000-G8976-C171-01
Advertisement
Table of Contents
