Table of Contents
Advertisement
i
All diagnostic options are described in the on-line help information
of the RLM Manager. To access that you can access by pressing the
function key or clicking the
F1
window.
To start monitoring the Radio Link Module, you must first connect to the
target Radio Link Module.
1. Start the RLM Manager program.
2. Select the target RLM from the local list or enter the IP address of the
Access Point RLM that you wish to monitor.
Alternatively, you can select
RLM menu to display all Access Points RLMs available in your subnet.
i
Only Access Points RLMs in the same subnet as the management
station are displayed in the list. To investigate a link outside of the
subnet, enter the specific IP address in the
3. Click
4. The monitor mode of the RLM Manager window is displayed as pictured
in
Figure 18 System Information
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
Access Point RLM field.
to connect to the target Radio Link Module.
button in your RLM Manager
Radio Link Module
Window.
from the
99
Advertisement
Table of Contents
