Table of Contents
Advertisement
Displayed across the top of the Site Monitor window are the following fields:
•
which you are currently connected.
•
network to which you are currently connected.
These fields will remain visible when selecting any of the other options in
the Site Monitor window.
Also displayed in the Site Monitor window are all Access Points RLMs that:
•
Belong to the same Infrastructure as the one to which you are currently
connected, and
•
Are within range of your CP 1515 Manager station.
In the site monitor mode you can customize the selection of site monitor
parameters to satisfy your personal preferences as described on
Customizing the Site Monitor Display (page
selection for standard site survey procedures is as follows:
•
This name is identified either in:
— The
(see
SNMP Parameters (page
— A user-defined Access Point (RLM)
using the CP 1515 Manager tool (see
•
- the signal to noise ratio which indicates the communications
quality with the various Access Points RLMs.
•
Points RLMs.
84
- describes the RLM density setting of the
(RLM name) - to identify devices by the name of the RLM:
field of the RLMs configuration
- to identify which radio channel is used by each of the Access
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
- which identifies the name of the network to
85). The recommended
211)).
AP Names Tab (page
, that you can create
90)).
C79000-G8976-C171-01
Advertisement
Table of Contents
