Siemens CP 1515 User Manual page 91

To display this name it is required that your computer first establishes true
data connections with such Access Points RLMs. This means your computer
did not yet:
• Walk around
• Use the
When you are running the CP 1515 Manager tool in site monitor mode, you
can use the
fly" to any Access Point RLM MAC address that you spot.
When you spot Access Points RLMs identified as "unknown" proceed as
follows:
1. Open the tab
2. Enter a MAC address or double-click on one of the MAC addresses in
the list.
3. Enter a name that allows for easy identification of this Radio Link Module
in the Access Point RLM
4. Next click the
MAC address.
5. Repeat steps 2 through 4 for all other MAC addresses.
6. When finished return to the
monitor survey.
When walking throughout the wireless networking environment, you may
see new MAC addresses appear when approaching other Access Points
RLMs. If that is the case, repeat the steps described above to complete your
Access Point (RLM)
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
tab
tab to assign the Radio Link Module name "on-the-
.
field.
button to associate the name with this
table.
tab to proceed with the site
91