•
Your CP 1515 Manager station is "out-of-range" of the Access Points
RLMs that you wish to monitor. Typically the values for signal level and
SNR are '0' (zero).
•
A configuration mismatch of your CP 1515 Manager station, for example:
— Your CP 1515 Manager station uses a specific network name that
does not match the name of the infrastructure that you wish to
monitor.
— Your CP 1515 Manager station uses the network name "ANY" , and
when it was powered up, the station erroneously connected to the
RLM of a neighboring network because that RLM provided the best
level of SNR.
•
The infrastructure that you wish to monitor has been "Closed" to
wireless IEEE 802.11 compliant devices that try to establish a radio
connection using:
— The network name "ANY" , or
— A zero-string SSID (the equivalent of the network name "ANY").
When your CP 1515 Manager station uses the network name "ANY" , you can
use the
(page
86).
For more information on "open" and "closed" infrastructure networks,
please consult
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
tab to see other networks as described on
Security (page
154).
Selection Tab
97