Table of Contents
Advertisement
4. (Optional) To add a non-listed protocol to the list, click the
button to enter the protocol manually.
5. When finished click
Figure
36.
All of the protocols that you have selected, and/or all of the custom
protocols that you have added manually, will be listed in the
field.
6. You can now select one of the other Bridge parameter options, change
other parameters or click
main RLM Manager window.
To filter out traffic exchanged between stations that is not required to be
sent or received via the wireless interface, you can set the
will be acceptable for most networking environments (see
36 Bridge Tab in the Edit
You can use the MAC filtering option for example to filter broadcast or
multicast messages exchanged between wired servers that can receive
each others messages also via the wired network.
To filter out traffic between such devices add the MAC addresses of both
devices as a pair in the
The way the filter works is that when one of the listed stations sends a
message to a MAC address that has been identified as a pair, the Access
Point RLM will not forward it via the wireless station. All traffic that one of
202
to return to the
in the bottom section of the
Mode).
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
to save your changes and return to the
tab as pictured in
tab. The default value,
Figure
list.
C79000-G8976-C171-01
Advertisement
Table of Contents
