Table of Contents
Advertisement
To create or edit the access control table:
1. Start the RLM Manager and select the Radio Link Module.
2. Click the
3. Select the
4. Click the
authorized as pictured in Figure 34 Setup Access Control.
By default, access control is set to
are currently no access restrictions defined.
5. Use the following buttons to modify the MAC address table:
•
- to add MAC addresses one at a time. You can also use the
listed MAC address.
•
- to change entries in the table.
•
•
•
•
6. Repeat step 5 for all stations you want to authorize to send/receive data
via this RLM.
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
button.
tab.
button to display all MAC addresses that are currently
field to enter a name or add a comment about the
- to remove MAC addresses one at a time.
- remove all MAC addresses and disable access control.
- to import an existing access control table.
- to save the current access control to a file.
, i.e. there
161
Advertisement
Table of Contents
