Parameterization Examples - Siemens SINUMERIK 840C Installation Instructions Manual

01.99
12.34.5

Parameterization examples

Example 1, incremental encoder:
The 2nd measuring system of the 4th and the 1st measuring system of the 3rd axis monitor
the measuring circuit of the 1st measuring system of the 1st axis.
1st axis: Principal axis (monitored axis)
1st measuring system released for monitoring
no absolute encoder
3rd axis: Monitoring axis
1st measuring system released for monitoring
no absolute encoder
4th axis: Monitoring axis
2nd measuring system released for monitoring
no absolute encoder
Example 2, EnDat absolute encoder
The 2nd measuring system of the 3rd axis monitors the measuring circuit of the 1st measuring
system of the 2nd axis. There, an EnDat absolute encoder is connected.
2nd axis: Principal axis (monitored axis)
1st measuring system released for monitoring
EnDat encoder
3rd axis: Monitoring axis
2nd measuring system released for monitoring
no EnDat encoder
Note on EnDat encoders:
Only the incremental encoder part may be used for the monitoring axis.
© Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
6FC5197- AA50
12 Functional Descriptions
12.34.5 Parameterization examples
MD 18320.3=0
MD 18320.1=1
MD 18080.0=0
MD 18322.3=1
MD 18322.1=1
MD 18082.0=0
MD 18323.4=1
MD 18323.2=1
MD 18083.0=0
MD 18321.3=0
MD 18321.1=1
MD 18080.0=1
MD 18322.4=1
MD 18322.2=1
MD 18082.0=0
12–353