Table of Contents
Advertisement
4.1
Controller Board
Figure 25 shows the general layout of the Lobby Control Unit main controller
board. See Figure 27 and Figure 31 for a detailed description of the connectors at
the bottom and top of the controller board.
Figure 25. Lobby Control Unit Main Controller Board
Telephone Access System Installation and Operation Manual
Version 3.7
LT-969
Copyright January 2017
Lobby Control Unit Setup
49 (119)
- Quick Links:
- Tx3 Systems
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TX3 Series and is the answer not in the manual?
Questions and answers
How can the caller ID altered to show New title when a call is received ?
To alter the caller ID to show a new title on the Mircom TX3 Series, you need to edit each message line:
1. Scroll to the message line (Line-2 or Line-3).
2. Press the 1 key 9 times to enter an asterisk (*) if needed.
3. Edit the message content as desired to change the displayed title.
4. Press the telephone (enter) key to accept the changes.
5. Press the info key to return to the previous menu.
This answer is automatically generated