Table of Contents
Advertisement
4.10
Configuration Using a PC
In order to correctly utilize the capabilities of the TX3 Telephone Access System
you must first plan and establish how you want to configure the system for your
application.
The easiest way to configure the Lobby Control Unit is with the Mircom TX3-
MSW Configuration Software. This software is provided on a single CD-ROM
or USB flash drive.
The PC connects to the Lobby Control unit controller board using one of the
following methods:
•
•
•
The TX3 system is compatible with the following modems:
•
•
•
•
•
Additional modems are currently being tested for compatibility.
The TX3 configuration is set using either the unit's own keypad and display or via
the PC Configuration Software.
4.10.1
PC System Requirements
The minimum system requirements are as follows:
•
•
•
•
•
•
Note:
Telephone Access System Installation and Operation Manual
Version 3.7
LT-969
Copyright January 2017
USB cable from the PC to the TX3 Main Lobby board
Ethernet connection (Lobby Control Unit must have an IP Module)
Modem connection (Lobby Control Unit must have a Modem Module)
TrendNet TFM-560U High Speed USB 2.0 Fax Modem
TrendNet TFM-561U High Speed USB 2.0 Fax Modem
Hiro H50113 56K V.92 USB Fax Modem
StarTech USB56KEM2 56k V.92 USB Fax Modem
Zoom 56K V.92 56K USB Mini External Fax Modem
Windows 7 (32 bit)
Windows XP SP2/ Vista (32 bit)
512 MB RAM
1 GHZ CPU
600M disk space
1 USB port
Firmware upgrade is not supported on 64-bit systems.
Lobby Control Unit Setup
65 (119)
- Quick Links:
- Tx3 Systems
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TX3 Series and is the answer not in the manual?
Questions and answers
How can the caller ID altered to show New title when a call is received ?
To alter the caller ID to show a new title on the Mircom TX3 Series, you need to edit each message line:
1. Scroll to the message line (Line-2 or Line-3).
2. Press the 1 key 9 times to enter an asterisk (*) if needed.
3. Edit the message content as desired to change the displayed title.
4. Press the telephone (enter) key to accept the changes.
5. Press the info key to return to the previous menu.
This answer is automatically generated