Table of Contents
Advertisement
•
Verify the following:
•
•
•
•
To start the configuration
1.
2.
3.
Telephone Access System Installation and Operation Manual
Version 3.7
LT-969
Copyright January 2017
LT-973 TX3 Configurator Quick Start
Ensure that the controller and all connected devices and components are
fully operational.
Ensure the controller DIP Switches (SW1) are set with a unique network
address.
Ensure the Configurator software is set with the correct controller network
address.
Ensure that your PC and the Configurator are set with the correct date and
time.
Connect the PC to the controller using the USB port.
Launch the Configurator and click Connect. Once connected the
connection icon appears in the Configurator tool bar.
Configure the Telephone Access system using the instructions in the
Configurator Software Program TX3-MSW or the LT-995 Configuration
and Administration Guide.
Lobby Control Unit Setup
67 (119)
- Quick Links:
- Tx3 Systems
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TX3 Series and is the answer not in the manual?
Questions and answers
How can the caller ID altered to show New title when a call is received ?
To alter the caller ID to show a new title on the Mircom TX3 Series, you need to edit each message line:
1. Scroll to the message line (Line-2 or Line-3).
2. Press the 1 key 9 times to enter an asterisk (*) if needed.
3. Edit the message content as desired to change the displayed title.
4. Press the telephone (enter) key to accept the changes.
5. Press the info key to return to the previous menu.
This answer is automatically generated