Capping Multiwell Titer Plates; Cap Strips; Aluminum Foil Lids; Using Adapters - Beckman Coulter Avanti J Series Instructions For Use Manual

Tubes, Bottles, and Accessories
Filling and Sealing Quick-Seal Tubes

Capping Multiwell Titer Plates

Multiwell titer plates—regular, deep-well, and square-well—can be run uncovered or using one of
the available cover types.

Cap Strips

Available sterile or nonsterile 96-cap strips can be used with deep-well plates. (When these caps are
used, the capacity of each well is reduced to 1.0 mL.)

Aluminum Foil Lids

Seal & Sample aluminum foil lids (538619) have a bioinert adhesive backing, enabling complete
plate sealing. The lids are presized for multiwell, deep-well, and square-well plates, and cause no
reduction in well capacity. A 4-inch soft-rubber roller (538618) is required to ensure secure sealing
of the foil lids

Using Adapters

Tubes and bottles used with adapters can be filled (and capped, if applicable) according to the type
of container and the design of the rotor being used.

Using Solid Multitube Adapters

The solid adapters, available in several tube configurations, can be filled and loaded into rotor
buckets or cavities without any preparation. They can also be used as tube racks in the laboratory.
3-14
96-Cap Strip
Roller
(538618)
Seal &
Sample
Foil Lid
(538619)
PN JR-IM-10AG