Table of Contents
Advertisement
Parker Hannifin Manufacturing Srl
Par.
b180.10 Electronic CAM2 engaging on master phase 0.
b180.11 Electronic CAM2 release on master phase 0.
b180.12 CAM 2 engaging immediately (Signal lock/Unlock CAM 2).
b180.13 Electronic CAM2 execution on single shot.
b180.14 (0)Caught quota master frequency input (1) Caught quota
Motor position-Storage in Pr58:59.
b180.15 Enable swap table (engage/release linear).
b181.0 Enabled Tab.0 in the Cam. =1 TAB0 is enabled.
b181.1 Enabled Tab.1 in the Cam. =1 TAB1 is enabled.
b181.2 Enabled Tab.2 in the Cam. =1 TAB2 is enabled.
b181.3 Enabled Tab.3 in the Cam. =1 TAB3 is enabled.
b181.4
Command swap of Tab.3 (Tab.3-Tab1-Tab.0). The switching
between the tables is showed in the picture.
The switching starts from TAB3 to TAB0, clockwise direction.
b181.5
Command swap of Tab.0 ( Tab.0-Tab2-Tab.3). The switching
between the tables is showed in the picture.
The switching starts from TAB3 to TAB0, counterclockwise
direction.
b181.6 Selection Table in the CAM 2. The state of this bit, together with
bit b181.7, identifies the selected table (see table below*).
b181.7 Selection Table in the CAM 2. The state of this bit, together with
bit b181.6, identifies the selected table (see table below*).
b181.8 Enable virtual table (Tab.3).
b181.9 Enable counter position from CAM1 to global counter
(Pr131:130). This command, b181.9=1, enable the reference of
CAM1. This value is added algebraically to global counter of
reference.
b181.10 Enable counter position from CAM 2 to global counter (
Pr131:130). This command, b181.10=1, enable the reference of
positioner. This value is added algebraically to global counter of
reference.
b181.11 Enable counter position from trapezoidal positioner to global
counter (Pr131:130). This command, b181.11=1, enable the
reference of CAM2. This value is added algebraically to global
counter of reference.
b181.13 Enable counter position from CAM 1 to reference position
(Pr60:61).
b181.14 Enable counter position from CAM 2 to reference position
(Pr60:61).
b181.15 Enable counter position from trapezoidal positioner to reference
position (Pr60:61).
106
Description
* Table selection
b181.6
Tab0
1
Tab1
1
Tab2
0
Tab3
0
user's manual TPDM
b181.7
1
0
1
0
Field
Def.
W
0
W
0
R
0
W
0
W
0
W
0
R
0
R
0
R
0
R
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Hide quick links:
Advertisement
Table of Contents
