Table of Contents
Advertisement
UM1564
1.3
Order code
To order the STM32F373VCT6 evaluation board, use the order code STM32373C-EVAL.
1.4
Delivery recommendations
Some verification of the board is needed before using it for the first time to make sure that
nothing was damaged during shipment and that no components are unplugged or lost.
When the board is extracted from its plastic bag, please check that no component remains
in the bag.
The main components to verify are:
1.
The 8-MHz crystal (X2) which may have been removed by a shock from its socket.
2.
The MicroSD card which may have been ejected from the connector CN7 (right side of
the board).
3.
The dual-interface EEPROM board (ANT7-M24LR-A) which may have been unplugged
from the connector CN3 (top left corner of the board).
For all information concerning the version of the MCU used on the board, its specification
and possible related limitations, please visit
sheet and erratasheet.
Caution:
There is an explosion risk if the battery is replaced by an incorrect one. Make sure to
dispose of used batteries according to the instructions.
www.st.com
Doc ID 023566 Rev 1
to download the relevant data
Overview
7/66
Advertisement
Table of Contents
Need help?
Do you have a question about the STM32373C-EVAL and is the answer not in the manual?
Questions and answers