Overview; Features; Demonstration Software - ST STM32373C-EVAL User Manual

Overview

1 Overview
1.1

Features

●
Four 5-V power supply options:
–
–
–
–
●
I2S audio DAC and stereo audio jack
●
2-Gbyte or more SPI interface MicroSD card
●
I2C compatible serial interface temperature sensor, EEPROM, and RF EEPROM (dual
interface EEPROM)
●
RS-232 communication
● IrDA transceiver
●
JTAG/SWD and ETM trace debug support, ST-LINK/V2 embedded
● 240x320 TFT color LCD connected to SPI interface
●
Joystick with 4-directional control and selector
●
Reset, wakeup or tamper and key button
●
4 color user LEDs and 2 LEDs as MCU power range indicators
●
ECG, pressure sensor, and PT100 temperature sensor connected to 16-bit sigma delta
ADC of the STM32F373VCT6
●
Extension connectors for daughterboard or wrapping board
● Microcontroller voltage choice: 3.3 V or adjustable from 2.0 V to 3.6 V
●
USB FS connector
● Touch slider
●
RTC with backup battery
● CAN2.0A/B compliant connection
●
Light-dependent resistor (LDR)
● Two HDMI connectors with DDC (display data channel) and CEC
●
IR transmitter and receiver
● Two ADC and DAC input and output signal connectors and one sigma delta ADC input
signal connector
●
Potentiometer
1.2

Demonstration software

Demonstration software is preloaded on the board's Flash memory for easy demonstration
of the device peripherals in standalone mode. For more information and to download the
latest version available, please refer to the STM32373C-EVAL demonstration software
available on www.st.com.
6/66
Power jack
ST-LINK/V2 USB connector
User USB connector
Daughterboard
Doc ID 023566 Rev 1
UM1564