Overview; Features; Demonstration Software; Order Code - ST STM32091C-EVAL User Manual

Overview

1 Overview
1.1

Features

•
STM32F091VCT6 microncontroller with 256 KB Flash and 32 KB RAM
•
Three 5V power supply options: Power jack, ST-LINK/V2-1 USB connector or daughter
board
•
Stereo audio jack which supports headset with microphone connected to DAC and
ADC of STM32F091VCT6
•
2G or more Byte SPI interface MicroSD card
•
I2C compatible serial interface Temperature Sensor
•
RF E2PROM
•
RS232 and RS485 communication
•
IrDA transceiver
•
IR LED and IR receiver
•
SWD debug support, ST-LINK/V2-1 embedded
•
240x320 TFT color LCD connected to SPI interface of STM32F091VCT6.
•
Joystick with 4-direction control and selector
•
Reset, Tamper and User buttons
•
4 color user LEDs and 2 LEDs as MCU low power alarm
•
Extension connector for daughter board or wrapping board
•
MCU voltage choice fixed 3.3v or adjustable from 1.65v to 3.6v
•
Touch sensing buttons
•
RTC with backup battery
•
CAN2.0A/B compliant connection
•
Light dependent resistor (LDR)
• Potentiometer
•
Two HDMI connectors with DDC and CEC
• Smart Card slot
•
8x USARTs chain connector
1.2

Demonstration software

Demonstration software is preloaded in the STM32F091VCT6 Flash memory for easy
demonstration of the device peripherals in stand-alone mode. For more information and to
download the latest version available, refer to the STM32091C-EVAL demonstration
software available on www.st.com.
1.3

Order code

To order the STM32F091VCT6 evaluation board, use the order code STM32091C-EVAL.
6/58 DocID026902 Rev 2
UM1817