Fieldbus Control with Embedded Fieldbus
System Overview
The drive can be connected to an external control system via
embedded fieldbus. The embedded fieldbus supports Modbus
RTU, BACnet
, Metasys
N2 and APOGEE
®
®
Embedded fieldbus connection is either RS-232 (control
panel connector X2) or RS-485 (I/O terminals 23...26) . The
maximum length of the communication cable with RS-232 is
restricted to 3 meters .
Figure 24: Control Information through Fieldbus Interface
OM 1190-1 • MD4 VFD
RS-232 is designed for a point-to-point application (a single
master controlling one slave) . RS-485 is designed for a
FLN Protocols .
multipoint application (a single master controlling one or more
®
slaves) .
70
f
C
Ieldbus
onTrols
f
C
Ieldbus
onTrols
www .DaikinApplied .com