Daikin ACS320 Operation Manual page 34

Code Description (continuation of Table 23)
0132 PID 1 DEVIATION
The difference between the PID 1 controller reference value and actual value .
• Units and scale defined by PID parameters 4006/4106 & 4007/4107.
0133 PID 2 DEVIATION
The difference between the PID 2 controller reference value and actual value .
• Units and scale defined by PID parameters 4206 & 4207.
0134 COMM RO WORD
Free data location that can be written from serial link .
• Used for relay output control .
• See parameter 1401 .
0135 COMM VALUE 1
Free data location that can be written from serial link .
0136 COMM VALUE 2
Free data location that can be written from serial link .
0137 PROCESS VAR 1
Process variable 1
• Defined by parameters in Group 34: Panel Display / Process Variables,
0138 PROCESS VAR 2
Process variable 2
• Defined by parameters in Group 34: Panel Display / Process Variables,
0139 PROCESS VAR 3
Process variable 3
• Defined by parameters in Group 34: Panel Display / Process Variables,
0140 RUN TIME
The drive's accumulated running time in thousands of hours (kh) .
0141 MWH COUNTER
The drive's accumulated power consumption in megawatt hours . Cannot be reset .
0142 REVOLUTION CNTR
The motor's accumulated revolutions in millions of revolutions .
0143 DRIVE ON TIME (HI)
The drive's accumulated power on time in days .
0144 DRIVE ON TIME (LO)
The drive's accumulated power on time in 2 second ticks (30 ticks = 60 seconds) .
0145 MOTOR TEMP
Motor temperature in degrees centigrade / PTC rdsistance in Ohms .
• Applies only if motor temperature sensor is set up . See parameter 3501,
0158 PID COMM VALUE 1
Data received from fieldbus for PID control (PID1 and PID2).
0159 PID COMM VALUE 2
Data received from fieldbus for PID control (PID1 and PID2).
0160 DI 1-5 STATUS
Status of digital inputs .
EXAMPLE: 10000 = DI1 is on, DI2 . . .DI5 are off .
0161 PULSE INPUT FREQ
Value of frequency input in Hz .
0162 RO STATUS
Status of relay output 1 .1 = RO is energized, 0 = RO is deenergized .
0163 TO STATUS
Status of transistor output when transistor output is used as a digital output .
0164 TO FREQUENCY
Transistor output frequency, when transistor output is used as a frequency output .
0173 RO 2-4 STATUS
Status of the relays in the Relay Output Extension Module MREL-0 . See MREL-01 Relay Output Extension Module User's Manual (3AUA0000035974 [English]) .
Example: 100 = RO 2 is on, RO3 and RO 4 are off .
0174 SAVED KWH
Energy saved in kWh compared to the energy used when the pump is connected directly to the supply . Can be reset with parameter 4509 ENERGY RESET (resets all energy
calculators at the same time) . See Group 45 ENERGY SAVING,
0175 SAVED MWH
Energy saved in MWh compared to the energy used when the pump is connected directly to the supply . Can be reset with parameter 4509 ENERGY RESET (resets all energy
calculators at the same time) . See Group 45 ENERGY SAVING,
0176 SAVED AMOUNT 1
Energy saved in local currency. To find out the total saved energy in currency units, add the value of parameter 0177 multiplied by 1000 to the value for parameter 0176.
Example:
0176 SAVED AMOUNT 1 = 123 .4
0177 SAVED AMOUNT 2 = 5
Total saved energy = 5 * 1000 + 123 .4 = 5123 .4 currency units . Local energy price is set with parameter 4502 ENERGY PRICE . Can be reset with parameter 4509 ENERGY RESET
(resets all energy calculators at the same time) .
See Group 45 ENERGY SAVING,
OM 1190-1 • MD4 VFD
page
page
page
page
page 66 .
page 66 .
page 66 .
57 .
57 .
57 .
59 .
34
a s p
CTual Ignals and arameTers
Range Resolution Default
— — —
— — —
0 . . .65535 1 0
-32768 . . .
1
+32767
-32768 . . .
1 0
+32767
— 1 —
— 1 —
— 1 —
0 . . .499 .99 kh 0 .01 kh 0 kh
0 . . .65,535
1 MWh
MWh
0 . . .9999 1 0
0 . . .65535 days 1 day 0
0 . . .43200
2s 0
hh:mm:ss
-10 . . .200 °C/
0 . . .5000 Ohm / 1 0
0 . . .1
1 = 1 Hz
1 = 1
1 = 1
1 = 1 Hz
1 = 0 .1 kWh
1 = 1 MWh
1 = 0 .1
(Currency)
www .DaikinApplied .com
S
0
-