Drive Diagnostics Web Page
The drive diagnostics page contains the standard header and footer along with diagnostic information specific to the current drive.
1.
Freq Ref:
2.
Motor Speed:
3.
Output Power:
4.
PID Feedback:
5.
Input Term Sts:
6.
Drive Run Status:
7.
Output Freq:
8.
Output Volts:
9.
Torque Ref:
10. Pulse In (RP):
11. Output Term Sts:
12. Drive Ready Status:
13. Output Current:
14. DC Bus Volts:
15. Elapsed Time:
16. N/A:
17. Analog In FR:
18. Drive Fault Status:
Fig 2.5 – Drive Diagnostics Web Page
Frequency Reference – Monitor Parameter U-01.
Motor Speed – Monitor Parameter U-02.
Output Power – Monitor Parameter U-11.
PID Feedback in %. U-16.
The Digital Input status as bit field – Monitor Parameter U-06.
Indicates RUN/STOP state of the drive.
Output Frequency – Monitor Parameter U-02.
Output Voltage – Monitor Parameter U-04.
Torque Reference in % of rated torque – Monitor Parameter U-08.
Pulse Input (terminals RP to FC).
Digital Output status as bit field – Monitor Parameter U-07.
Indicates the drive READY status.
Output Current – Monitor Parameter U-03.
DC bus Voltage – Monitor Parameter U-05.
Elapsed Time.
Analog input (terminals FR to FC).
Indicates drive FAULT status.
Installation 2-6