Table of Contents
Advertisement
Important Notes
1.
It is strongly recommended that shielded CAT-5 cable be used for all network cables.
2.
Switches implementing IGMP snooping are strongly recommended. When IGMP snooping is used, devices will only receive the
multicast packets in which they are interested.
3.
The maximum number of simultaneous connections is: 1 for I/O, 4 for Explicit, 2 for Drive Wizard.
4.
To simplify the drive configuration, EDS files can be obtained at www.yaskawa.com. From the Yaskawa web site, select Downloads
==> By Inverter Drives ==> By Product ==> Network Comms-Ethernet. Then select the appropriate EDS file based on the drive
series and the latest version of those listed. EDS files for individual drive models are compressed into a single Zip file and need to be
un-zipped into a temporary directory in order to be installed. For example: The current file containing all of the V7AM EDS files is
named EDS_V7AM_UTC000190_V1_02.zip. To extract the EDS file for drive model 20P4, extract the EDS file named
V7AM20P4_UTC000190_V1_0*.eds.
Refer to the V7 technical or parameter access manual for a complete list of drive parameters and registers available. A list of applicable
manuals is available at the beginning of this document.
Installation 1-14
Hide quick links:
Advertisement
Table of Contents
