Table of Contents
Advertisement
Configuring the EtherNet/IP Option Kit
1.
Select Configuration from the main web page.
2.
After the Configuration page has been displayed, select the method in which the EtherNet/IP Option Kit will obtain its IP address.
2.1
User: The EtherNet/IP Option Kit will use the network address as entered in the IP, Subnet and Gateway fields. Check with
the system schematic or network administrator to insure that the IP address is valid and unique and that the subnet mask and
gateway are correct.
2.1.1
The USER radio button is used in this example.
2.1.2
Enter the new IP address, 192.168.1.20 in this example.
2.2
DHCP: The EtherNet/IP Option Kit will use the network address assigned to it by the DHCP server.
2.3
BOOTP: The EtherNet/IP Option Kit will use the network address assigned to it by the BOOTP server.
3.
Select the Gateway Usage. Connectivity to the EtherNet/IP Option Kit may be limited or nonfunctional if the gateway usage setting
and gateway address do not match the network infrastructure in which it is installed.
3.1
Do not use default gateway in system. Select this radio button to disable the gateway when there is no external gateway in
the system.
3.2
Use default gateway in system. Select this radio button to enable the gateway when there is an external gateway in the
system. Verify and/or update the gateway address as necessary, so that it matches the address of the system gateway.
3.3
In all cases the Gateway field must contain a valid IP address and must not be blank.
4.
When the new configuration, IP address and subnet mask have been entered, click the Submit button.
5.
Verify that the information is correct on the Submit Results page.
6.
Power cycle the drive in order to store the new information on the EtherNet/IP Option Kit.
Note: The IP address in the browser address bar will have to be changed to the drive's new IP address and the web page refreshed in order to
continue to communicate with the EtherNet/IP Option Kit web pages.
Fig 1.8 – Configuring an EtherNet/IP Option Kit
Installation 1-12
Hide quick links:
Advertisement
Table of Contents
