Approved Manufacturing Locations; European Directive Information; European Pressure Equipment Directive (Ped) (97/23/Ec; Electro Magnetic Compatibility (Emc) (89/336/Eec - Emerson Rosemount 5600 Series Reference Manual

Reference Manual
00809-0100-4025, Rev AA
May 2003
Appendix A
Approved Manufacturing
Locations
EUROPEAN DIRECTIVE
INFORMATION
European Pressure
Equipment Directive
(PED) (97/23/EC)
Electro Magnetic
Compatibility (EMC)
(89/336/EEC)
Other important
guidelines
www.rosemount.com
Product Certificates
Product Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page A-1
Approval Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page A-4
Saab-Rosemount — Gothenburg, Sweden
The EC declaration of conformity for all applicable European directives for this
product can be found on our website at www.rosemount.com. A hard copy
may be obtained by contacting our local sales office.
PED does not apply with the 5600 Series.
Installed signal wiring should not be run together and should not be in the
same cable tray as AC power wiring.
Device must be properly grounded or earthed according to local electric
codes.
To improve protection against signal interference, shielded cable is
recommended.
Only use new, original parts.
To prevent the process medium escaping, do not unscrew or remove process
flange bolts, adapter bolts or bleed screws during operation.
Maintenance shall only be done by qualified personnel.
Rosemount 5600 Series