Section 1: Overview; Purpose; Assumed Knowledge; Additional References - Johnson Controls SWIFT Instruction Manual

Smart wireless integrated fire technology

Hide thumbs

Table Of Contents

Table of Contents

1.1 Purpose

The SWIFT™ Network Manual provides an overview of the following:

•

Wireless fire alarm system

•

Instructions for installing and configuring the wireless devices

•

Information on monitoring the status of the wireless devices

•

Removal and replacement procedures of the Wireless Gateway

•

Testing, maintenance, and firmware upgrade information of the Wireless Gateway

1.2 Assumed Knowledge

This document is created with the assumption that all users are familiar with working on a PC and

laptop for configuration purposes. Installers should be familiar with the fire alarm and related ser-

vice standards. The terminology and level of details of this document reflect this assumption.

1.3 Additional References

The table below provides a list of documents referenced in this manual, as well as documents for

selected other compatible devices.

JCI SLC Wiring Manual

IFC2-3030 Fire Alarm Control Panel

JNCA-2 Network Control Annunciator

IFC2-640 Fire Alarm Control Panel

IFC-320 Fire Alarm Control Panel

JFWD-200P Wireless FlashScan Photo Detector

JFWD-200ACCLIMATE Wireless FlashScan Photoelectric Detector

JFWH-200ROR135 Wireless FlashScan Rate of Rise Heat Sensor

JFWH-200FIX135 Wireless FlashScan Fixed Heat Sensor

JFW-MM Wireless FlashScan Monitor Module

JFW-RM Wireless FlashScan Relay Module

B210W Wireless Detector Base

1.4 About the Mesh Network

Use of these products in combination with non-Honeywell products in a wireless mesh network, or

to access, monitor, or control devices in a wireless mesh network via the internet or another exter-

nal wide area network, may require a separate license from Sipco, LLC. For more information, con-

tact Sipco, LLC or IntusIQ (Ipco), LLC at 8215 Roswell Rd, Building 900, Suite 950. Atlanta, GA

30350, or at www.sipcollc.com or www.intusiq.com.

SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000JC-E:C 5/8/2015